MV Screened Elbow - ANSI (Polymeric Cables)

    Item Code: 09-MV-ELBOW-ANSI

    Description

    Description

    Supplied / kitted by DT Jointing Solutions Pty Ltd, the 600A ANSI screened bolted type elbow range is a world class, tried and tested solution.

    Suitable for 3C, 1C or 3 x 1C CWS XLPE Cable.

    For 3 Core kits, the standard 3X1 core kit is supplied along with a trifurcation / breakout kit.

    All sizes are complete with MV crimp lugs.

    Cable ranges are 22kV to 33kV, 35 sq mm through to 630 sq mm.

    The 22kV product is often used on an 11kV system; however the ANSI range does not produce a specific 11kV housing and / or bushing. As such, consideration and investigation will need to be undertaken on 11kV requirements as the housing must match the bushing primarily and then the cable. For instance, if the system and cable is 11kV but the bushing is 22kV, a 22kV ANSI screened elbow must be utilised and fitted out appropriately to suit the 11kV cable.

    There are no special tools required for terminating aside from your standard jointing tools and dies. Please check for die requirements prior to receiving the goods.

    Housings are a moulded EPDM with conducting rubber screen that controls electrical stress in one of most effective methods used in the industry.

    Cable reducers / adapters are geometric in nature, still considered the most reliable and effective method available. No stress control mastic is required.

    The EPDM is 3mm thick providing surety.

    The elbows have 2 x capacitive test points.

    Water sealing is completed utilising heatshrink and water sealing mastic covering from the housing itself, all the way to the screen wires.

    Fully submersible and 100% factory tested.

    It is important to check the termination is suitable for the intended application, with particular emphasis on the interface / bushing.

    Price Excl. GST

    $740.50 to $4,876.83
    $740.50 to $4,876.83