MV Screened Elbow 630A - Interface "C" (Polymeric Cables)
Item Code: 09-MV-ELBOW-630A-INT-C
Description
Description
Supplied / kitted by DT Jointing Solutions Pty Ltd, the 630A Interface C screened bolted type elbow and matching piggy back range is a world class, tried and tested solution.
Suitable for 3C, 1C or 3 x 1C CWS XLPE Cable.
All sizes are complete with MV Shear lugs.
For 3 Core kits, the standard 3X1 core kit is supplied along with a trifurcation / breakout kit.
Cable ranges are 11kV to 33kV, 25 sq mm through to 300 sq mm.
There are no special tools required for terminating aside from your standard jointing tools.
Housings are a moulded EPDM with conducting rubber screen that controls electrical stress in one of most effective methods used in the industry.
Cable reducers / adapters are geometric in nature, still considered the most reliable and effective method available. No stress control mastic is required. The EPDM is 3mm thick providing surety.
The elbows have 2 x capacitive test points.
Water sealing is completed from the housing itself, all the way to covering the screen wires.
Fully submersible and 100% factory tested.
It is important to check the termination is suitable for the intended application, with particular emphasis on the interface / bushing.
Suitable for 3C, 1C or 3 x 1C CWS XLPE Cable.
All sizes are complete with MV Shear lugs.
For 3 Core kits, the standard 3X1 core kit is supplied along with a trifurcation / breakout kit.
Cable ranges are 11kV to 33kV, 25 sq mm through to 300 sq mm.
There are no special tools required for terminating aside from your standard jointing tools.
Housings are a moulded EPDM with conducting rubber screen that controls electrical stress in one of most effective methods used in the industry.
Cable reducers / adapters are geometric in nature, still considered the most reliable and effective method available. No stress control mastic is required. The EPDM is 3mm thick providing surety.
The elbows have 2 x capacitive test points.
Water sealing is completed from the housing itself, all the way to covering the screen wires.
Fully submersible and 100% factory tested.
It is important to check the termination is suitable for the intended application, with particular emphasis on the interface / bushing.